Booster Robotics K1
Sold through Booster's official store and inquiry form.
A 95 cm, 19.5 kg education and development humanoid with 22 degrees of freedom.
How much does the K1 weigh? Booster Robotics publishes 19.5 kg (43 lb) and a height of 95 cm (3 ft 1 in). A real purchase path exists for a buyer in the US today.
- Height
- 95 cm
- Weight
- 19.5 kg
- Degrees of freedom
- 22
- Runtime
- 30 min
- Availability
- Buy now
Specifications
9/17 published
| Height | 95 cm |
|---|---|
| Weight | 19.5 kg |
| Degrees of freedom | 22 |
| Payload | Not published |
| Runtime | 30 min |
| Battery capacity | Not published |
| Max speed | 0.4 m/s |
| Hand type | Not published |
| Actuator type | Not published |
| Hot-swap battery | Not published |
| Onboard compute | 48 / 117 / 200 TOPS options |
| Sensors | Stereo depth camera, 9-axis IMU, 3-mic array |
| IP rating | Not published |
| Operating temperature | Not published |
| Teleoperation supported | Not published |
| SDK / secondary development | Yes |
| Warranty | 3 months |
Values entered only where Booster Robotics publishes them. We do not estimate, interpolate, or copy figures from reviews.
Price & availability tracking
Methodology →- Current list price
- Not published
- Booster Robotics does not publish a K1 price on its product page.
- Last change
- No change recorded
- Oct 13, 2026Not publishedBuy now
How the K1 differs from other Booster Robotics models
Straight differences in the figures Booster Robotics publishes for each model in this category. Attributes either model leaves unpublished are excluded rather than guessed.
vs Booster Robotics T2
Lower on the K1
Height: 95 cm on the K1 against 140 cm on the T2.
Weight: 19.5 kg on the K1 against 42 kg on the T2.
Degrees of freedom: 22 on the K1 against 31 on the T2.
The number of independent joints the robot can move. More degrees of freedom generally means more flexible, humanlike movement, though it also adds cost and complexity.
Runtime: 30 min on the K1 against 120 min on the T2.
How long the robot can operate on a single charge under typical use. Real world runtime is usually shorter than the quoted figure, since heavier tasks drain the battery faster.
Max speed: 0.4 m/s on the K1 against 3 m/s on the T2.
1 published attribute is identical on both models.
vs Booster Robotics T1
Lower on the K1
Height: 95 cm on the K1 against 118 cm on the T1.
Weight: 19.5 kg on the K1 against 30 kg on the T1.
Degrees of freedom: 22 on the K1 against 23 on the T1.
The number of independent joints the robot can move. More degrees of freedom generally means more flexible, humanlike movement, though it also adds cost and complexity.
Runtime: 30 min on the K1 against 120 min on the T1.
How long the robot can operate on a single charge under typical use. Real world runtime is usually shorter than the quoted figure, since heavier tasks drain the battery faster.
Warranty: 3 months on the K1 against 12 months on the T1.
1 published attribute is identical on both models.
What Booster Robotics does not publish for this model
Booster Robotics does not publish 8 of the attributes we track for the K1, listed below. Those rows read Not published rather than carrying an estimate.
- Payload
- Battery capacity
- Hand type
- Actuator type
- Hot-swap battery
- IP rating
- Operating temperature
- Teleoperation supported
K1 questions answered from published data
- How much does the K1 cost?
- Booster Robotics does not publish a list price for the Booster Robotics K1, so no price is shown here rather than an estimate.
- How much does the K1 weigh and how tall is it?
- Booster Robotics publishes a weight of 19.5 kg (43 lb) and a height of 95 cm (3 ft 1 in) for the Booster Robotics K1.
- What are the K1 specifications?
- Booster Robotics publishes height of 95 cm, weight of 19.5 kg, degrees of freedom of 22, and runtime of 30 min for the Booster Robotics K1. In total 9 of the 17 humanoid robots attributes we track are published for this model; the rest read Not published.
- Does Booster Robotics list the K1 with sdk / secondary development?
- Yes. Booster Robotics lists sdk / secondary development as included on the Booster Robotics K1. Whether the manufacturer provides a software development kit for writing your own applications for the robot. Without one you are limited to the software the manufacturer ships.
- How does the K1 compare to the T2?
- On manufacturer-published figures: The T2 lists a higher height and weight. Every attribute either model publishes is set side by side on our comparison, with unpublished figures marked rather than guessed.